ESP32 Generic Monitor Prototyping Board
ESP32 Prototyping/Dev Board that allows various connectors to be easily wired up to any of the available GPIOs.
Specifically for the cheaper ESP32 DEVKIT-C v4 devices.
Includes one dedicated DS18b20 temperature sensor socket on-board.
Small (1.27mm) JTAG socket and JTAG PWR connector included.
Reset button included.
ESP32 can be powered via
- JTAG device (eg ESPTOOL)
- External +5V supply to socket on PCB
- USB to the ESP32 device
On socket dedicated for a DS18b20 temperature sensor. Just needs the GPIO pin connected.
ESP32 Generic Monitor Prototyping Board
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Ralph Bacon
-
ESP32 Generic Monitor Prototyping Board
ESP32 Prototyping/Dev Board that allows various connectors to be easily wired up to any of the avail...
-
Standalone Minimalist Nano DIP
If you're trying to use a bare 328P chip in your project (SMD or DIP) it can be awkward to update te...
-
PIR Deep Sleep for ATMega328P
This is a practical implementation of the ATMEL ATMega328P Deep Sleep mode, interrupted (woken up) b...
-
Programmable Mist Maker - XIAO / QT PY Extension
1061 2 1 -
RadioHAT - Raspberry Pi radio development platform
867 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3323 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3933 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4320 2 2
