ERCF EASY BRD
This is a standalone board for the "EnragedRabbitCarrotFeeder" compatible with the firmware Klipper. Instead of routing cables from your main MCU up to your ERCF unit, this extension board can be use close to your ERCF unit.
Adds 2 steppers, 1 servo powered by a 5V regulator and 3 endstops / sensors to your 3D printer.
Instructions and BOM : https://github.com/Tircown/ERCF-easy-brd
More informations on the EnragedRabbitProject : https://github.com/EtteGit/EnragedRabbitProject
ERCF EASY BRD
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(13)
- 4 USER VOTES
- YOUR VOTE 0.00 0.00
-
6design
-
10usability
-
10creativity
-
10content
-
10design
-
10usability
-
10creativity
-
10content
-
10design
-
10usability
-
10creativity
-
10content
-
9design
-
10usability
-
10creativity
-
9content
More by Tircown
-
Programmable Mist Maker - XIAO / QT PY Extension
1014 2 1 -
RadioHAT - Raspberry Pi radio development platform
816 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3276 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3895 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4276 2 2
