|
KiCADKicad
|
Dual CF-to-IDE Adapter
A dual CompactFlash-to-IDE adapter designed to connect two CF cards to a standard 40-pin IDE interface. Each CF slot can be configured independently as Master, Slave, or Cable Select. The board also provides selectable CF supply voltage and selectable power input.
The project is intended for vintage-computing and other systems that use an IDE/ATA interface.
Features
-------------
Two CompactFlash card slots (Slot A and Slot B).
Independent Master / Slave / Cable Select configuration for each slot.
Selectable CF supply voltage: 5 V or 3.3 V.
Selectable power source: external +5 V input or power from IDE pin 20.
Four status LEDs:
POWER – board power indication.
MASTER – Master status indication.
SLAVE – Slave status indication.
ACTIVITY – activity indication.
Polyfuse protection on the power input.
You can find more information on github https://github.com/r0b0t1cu/Dual-CF-to-IDE-Adapter
Dual CF-to-IDE Adapter
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen(Without Speaker)
BUY NOW- Comments(0)
- Likes(0)
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by CLAUDIU OANA
-
Dual CF-to-IDE Adapter
A dual CompactFlash-to-IDE adapter designed to connect two CF cards to a standard 40-pin IDE interfa...
-
RC2014 Turbo Sound
An original dual AY/YM TurboSound board for RC bus systems and compatible Z80 computers. The design ...
-
Pi1541Simple HAT
A Raspberry Pi HAT for the Pi1541 project — a cycle-exact emulator of the Commodore 1541 floppy disk...
-
C64 Magic Desk Cartridge
An open-source hardware clone of the Magic Desk cartridge format for the Commodore 64. Supports both...
-
ZX Spectrum 27C512 EPROM Adapter
This adapter board allows you to replace the original ROM of a ZX Spectrum 48K with a 27C512 (64KB) ...
-
ZX Spectrum Composite Mod PCB
This is a small replacement board for the original RF modulator found in the ZX Spectrum. It provide...
-
ZX Spectrum custom keyboard
A custom keyboard PCB for use with Cherry MX (and compatible) switches.This is part of a bigger proj...
-
BorePilot - ESP32-S3 Smart Borewell Pump Controller
189 0 0 -
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
391 0 1 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
424 0 1 -
-
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1567 0 4







