Decade Resistor Box By RNA
All you need to add are 5x Lorlin CK1059 switches with the knobs of your choice. It is designed to have the connecting leads soldered to the board as to make the least compromise compared to banana plugs etc.
Decade Resistor Box By RNA
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(0)
More by Matt
-
The NuTube Adaptor Board.kicad_pcb
Due to its small pin pitch I made this little adaptor to convert it to 2.54mm used by most breadboar...
-
Decade Resistor Box By RNA
All you need to add are 5x Lorlin CK1059 switches with the knobs of your choice. It is designed to ...
-
8 Channel Balanced I/O to Bread board Interface
Needing to get balanced audio lines to the bread board can be a simple task.This PCB was designed to...
-
Programmable Mist Maker - XIAO / QT PY Extension
1510 2 1 -
RadioHAT - Raspberry Pi radio development platform
1266 0 3 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3624 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4304 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4693 2 2 -
