DS2408S 1-Wire Relay
PCB - 1mm
Zasilanie +5V DC
Z1
1 - IO 1-Wire
2 - GND 1-Wire/VDC
4 - +5VDC
Elementy do zamontowania:
ZW1
Zasilanie 9V AC/DC
Z1
1 - IO 1-Wire
2 - GND 1-Wire
3,4 - 9V AC/DC
Elementy do zamontowania:
B1, C2, C3, IC2 + radiator
Obudowa:
CEM22-V www.euroclamp.it/CEM22-V
DS2408S 1-Wire Relay
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by Irek
-
DS2408S 1-Wire Relay
PCB - 1mmZasilanie +5V DCZ11 - IO 1-Wire2 - GND 1-Wire/VDC4 - +5VDCElementy do zamontowania:ZW1Zasil...
-
Programming ESP8266 Supla
Adaptation of the FTDI FT232RL interface for programming the roller shutter controller described on ...
-
ESP8266 Supla
Controlling blinds or lighting. Input for the DS18B20, DHT11 or DHT22 sensor.Everything works at www...
-
Programmable Mist Maker - XIAO / QT PY Extension
1812 2 2 -
RadioHAT - Raspberry Pi radio development platform
1549 0 3 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3784 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4531 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
5334 2 2 -
