|
|
EasyEdaEasyEda
|
DIY Battery charger (0v and 5v pwr pins)
this is a fun starter kit. the only things not included are: 2 pieces of wire and a 5v pwr supply.
DIY Battery charger (0v and 5v pwr pins)
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
More by Joseph Redman
-
BerryScript Hat V1
If you want a HAT version of the project instead of breadboard here it is. all you need to do is buy...
-
Simple USB Powered Counter Kit
This is a very simple binary counter. this is one of the easier kits, the only hard bit is the usb. ...
-
tiny electromagnetic inductor
Wireless LED's?!? It must be MAGIC!! Nope! just uses electromagnetic induction! There is a cool mix ...
-
DIY Battery charger (0v and 5v pwr pins)
this is a fun starter kit. the only things not included are: 2 pieces of wire and a 5v pwr supply.
-
Programmable Mist Maker - XIAO / QT PY Extension
1017 2 1 -
RadioHAT - Raspberry Pi radio development platform
823 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3279 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3902 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4279 2 2
