DCDC 9 - 50V to 5V 500ma
AA27 is an DCDC converter based on LV2862XLVDDCR from Texas Instruments. This converter is designed for IOT applications which requires a wide range of input voltage. Such small PLCs, controllers, or small devices powered from passive POE. Modul is designed as a drop-in replacement for L7805 with two extra ground pins for better EMC (connection of these additional GND is not necessary for functionelity of the converter). Device itself uses a TO-247 body with mounting hole for standard TO-247 cooler. Do not use this converter with cooler without an isolation pad.
DCDC 9 - 50V to 5V 500ma
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Simon Hosa
-
Programmable Mist Maker - XIAO / QT PY Extension
1071 2 1 -
RadioHAT - Raspberry Pi radio development platform
884 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3333 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3941 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4328 2 2
