Clockception module PCB v1.7
The Clockception board is the basis for a Clockception module. By combining several of these modules you can build the Clockception Clock.
Alternatively, you can of course also use a single module as a simple analogue clock.
The project is still work in progress so some details might change.
So far communication between the modules is handled over CAN. An ESP32 is used as a master communicating with the slaves (Atmega328P) on each module. The Slave controls light and stepper motor of the digits.
Latest development contains bulk flashing of the Amtega328P via CAN.
More info is also available on Nerdiy.de and in the GitRepo: https://github.com/Nerdiyde/Clockception
First movements:
Clockception module PCB v1.7
*PCBWay community is a shared platform and we are not responsible for any design issues.
- Comments(1)
- Likes(0)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
-
7design
-
6usability
-
7creativity
-
6content
More by Nerdiy.de
- solarSens - A 3D printable solar weatherstation The solarSens weatherstation is based on the solarSens PCBIt contains a GSM or LoRa radio module, a ...
- pxlBlck_10x11mini v1.1 - SK6812 based LED matrix PCB An additional overview of the construction and the assembly is also available in the following video...
- Clockception module PCB v1.7 The Clockception board is the basis for a Clockception module. By combining several of these modules...
- pxlBlck_ringMicro - A micro sized Ring Clock PCB The pxlBlck_ringMicro PCB is based on the ESP32. In combination with 60 SK6805 RGB LEDs, various ani...
- pxlBlck_16x16micro v1.2 - 16x16 pixel and 40x40mm big LED matrix module This is a 40x40mm big 16x16 pixel LED matrix that can be driven by only one MCU GPIO.More info is al...
- buttonBoard_V1.2 - A multipurpose ESP32 powered IOT button PCB The ButtonBoard PCB is my attempt to kill several birds with one stone. On the one hand, I’ve always...
- Anemosens_Sensor_PCB - Sensor PCB for my 3D printed anemometer "Anemosens" The Anemosens sensor PCB is the basis for the sensor structure of Anemosens, a 3D printed anemometer...
- Anemosens_MCU - MCU PCB for my 3D printed anemometer "Anemosens" The Anemosens_MCU Board it will be possible to use Anemosens as a standalone Anemometer that can be ...
- pxlDigit_PCB - Configurable seven-segment digit IOT PCB V1.2 The idea for the pxlDigit_PCB came to me while building the pxlDigit (build article here: https://ne...
- pxlBlck_multiPCB - a multi purpose IOT LED-Matrix board One of my past PCB projects is the "pxlBlck_multiPCB". As the name suggests, this board is the heart...
- i2c_mtrDrvr V1.0 Will follow as soon as the build guide on Nerdiy.de is finished
- i2c_slideR_75 V1.0 Will follow as soon as the build guide on Nerdiy.de is finished
- nanoPxl v1.1 by Nerdiy.de You can find all needed information including detailed build instructions and material list here: ht...
-
Open Source Very Large Stick - Freejoy & MMjoy2 breakout board
412 0 0 -
RF Control training board for students based on ESP32 C3
561 0 2 -
Aquarius+ Computer, Standard PCB
769 0 4 -
KINETIC COASTERS with a TWIST! Laser or 3D Print some DIY Magic
536 0 1 -
RPI - 8 IO PLC With ATTiny85 Watch Dog
467 0 1 -
Nintendo Famicom HVC-001 Controller Shells
565 0 1 -
COMMODORE 128 DIAGNOSTIC REV.785260 KEYBOARD DONGLE
531 0 4 -
COMMODORE 128 15KHz DISPLAY ADAPTER (C128 80 COLUMN ADAPTER)
709 1 4 -