ClimatePlaceHard3.1
The board is designed based on the "Climate Control" project and has the following features:
Compact size of 76x76mm.
Contains a compact power supply unit HLK-PM01.
Power voltage is directly connected to the fuse relay with a maximum current of 30A.
Connectors for noiseless SSR-relays have been installed.
Connectors for connecting two heaters in parallel have been installed.
Connectors for connecting external relay modules (for example, Universal B1) for controlling exhaust and humidifier have been installed.
You can opt out of the fuse and use its relay for direct heater activation. To do this, you need to solder a jumper in place of the SSR-220V connector and change the heater controller GPIO settings from 4 to 13.
ClimatePlaceHard3.1
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(0)
More by Kas Dim
-
Project Chick 3.2
Project Chick 3.2 by SmartESP.net
-
Project SeedBox 3.2
Project SeedBox 3.2 from SmartESP.net
-
Project Seed 3.2
greenhouse, seedling, incubator
-
ClimatePlace 3.2
Universal! The developed scheme provides for both the placement of elements on the board and the ref...
-
Climate3.2
Universal! The developed scheme provides for both the placement of elements on the board and the ref...
-
ClimatePlaceHard3.1
The board is designed based on the "Climate Control" project and has the following features:Compact ...
-
ClimatePlace3.1
The board is designed based on the "Climate Control" project and has the following features:Compact ...
-
Climate3.1
Universal! The developed scheme provides for both the placement of elements on the board and the ref...
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
234 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
240 0 1 -
-
-
