|
|
esp32 |
x 1 | |
|
|
ft231xs |
x 1 | |
|
|
IS31FL3236A |
x 1 |
Christmas gingerbread house
This is a Christmas decoration for this year when staying at home became the new normal.
The pcb has two exposed areas for the windows and on the back of the left side of the window there is a tree silhouette that should appear when the leds are lit around it. The circuit is a standard one, based on a ESP32 WROOM-32 and a usb to serial converter from FTDI FT231XS-R. For led control I chose a 36 channel led driver capable of dimming the lights. For portability, I also used MCP73831 for Li-Po battery charging.
Stay safe and merry Christmas !
Christmas gingerbread house
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(7)
More by Boogami
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
150 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1000 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
574 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3044 2 3 -
RadioHAT - Raspberry Pi radio development platform
2590 0 4 -
-
-
