Niklas Heinzel

GERMANY • + Follow

Steven Piper

UNITED KINGDOM
- 0
- 0
MGDE
- 0
- 0
David Dressner

UNITED STATES OF AMERICA
- 0
- 0
Niklas Heinzel

GERMANY
- 7
- 3
5

Components

	LED´s (red	x 12
	green)	x 12
	220k Ohm resistor	x 4
	arduino	x 4

Description

Christmas2019 - Christmas PCB - Christmas Tree

Last Christmas I saw a really cool PCB Christmas tree at a friends place, and I decided to make one (or a few) for this year, and share it here to give something back to the community.

Nice to have;D

Arduino (or any other device capable of programming an ATmega328)
soldering iron (preferably with temperature control)
fine solder (not bigger than 0.5mm in diameter)
flux pen
multimeter
fine tweezers
pliers
sandpaper

This PCB, can be hooked up to an Arduino microcontroller that controlles the rows of LED′s via PWM. (pulse widht modulation)

Each led has an resistor of an resistance of 220k Ohms and needs to be powered via 5V.

Have a beautiful christmas time!

Niklas:D

Nov 18,2019

3,893 views

Christmas2019 - Christmas PCB - Christmas Tree

In my vacacion, I started an schools project to create an christmas tree with leds. See how I′ve done it;D

3893

5

1

7.83 (13)

Published: Nov 18,2019

Standard PCB

PCBWay Donate 10% cost To Author

Only PCB

Project images are for reference only. Actual production is based on the manufacturing files on the project page. Please review the designer's notes (e.g., PCB thickness) and select the appropriate options. PCBWay is not responsible for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to Read More

Copy this HTML into your page to embed a link to order this shared project

Copy

Under the Attribution-ShareAlike (CC BY-SA) License.

DAPLink Debugger & Programmer Simulator

BUY NOW

MAX7219-Driven 8x8 Red LED Matrix Module

BUY NOW

Digispark ATTiny85 USB Development Board - Micro-USB Programmable Arduino-Compatible Module

BUY NOW

ESP32 Camera Development Board with OV2640 Module - WiFi and Bluetooth IoT Platform

BUY NOW

ESP32-P4-WIFI6 High-Performance Development Board（the ESP32-P4 Board only (Standard Ver.)）

BUY NOW

ESP32-S3 1.47inch LCD display Development Board Type B

BUY NOW

Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）

BUY NOW

Smart Soldering Iron TS101-BC2

BUY NOW

Topic

DIY Electronics

Computers & USB

Christmas2019 arduino led tree christmas 3rd PCB Design Contest

Comments(1)
Likes(5)

Upload photo

You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP

0 / 10000

VOTING 13 votes

13 USER VOTES

7.83

YOUR VOTE 0.00 0.00

1
2
3
4
5
6
7
8
9
10

Design 1/4

1
2
3
4
5
6
7
8
9
10

Usability 2/4

1
2
3
4
5
6
7
8
9
10

Creativity 3/4

1
2
3
4
5
6
7
8
9
10

Content 4/4

Engineer

10

design
10

usability
10

creativity
10

content

10.00

Engineer

9

design
8

usability
8

creativity
9

content

8.50

Engineer

10

design
4

usability
5

creativity
10

content

7.25

jordanyte

Engineer

8

design
6

usability
7

creativity
5

content

6.50

Emre KONCA

Engineer

9

design
9

usability
9

creativity
9

content

9.00

Perez Pariente

Engineer

9

design
9

usability
10

creativity
7

content

8.75

Mitch Altman

Engineer

6

design
6

usability
5

creativity
5

content

5.50

andres nino

Engineer

8

design
8

usability
8

creativity
5

content

7.25

Jiri Praus

Engineer

9

design
5

usability
9

creativity
5

content

7.00

Heinzel

Engineer

10

design
10

usability
10

creativity
10

content

10.00

Engineer

9

design
4

usability
4

creativity
9

content

6.50

Engineer

7

design
8

usability
8

creativity
8

content

7.75

Engineer

7

design
8

usability
8

creativity
8

content

7.75

More by Niklas Heinzel

You may also like

This is an open source, programmable mist maker built as an expansion board for the Seeed Studio XIAO ESP32-C6. It mounts directly on the XIAO or QT PY, is powered over USB-C, and turns a piezo atomiz...
Programmable Mist Maker - XIAO / QT PY Extension

1787 2 2
David Yang

David Yang

UNITED STATES OF AMERICA

0

0
RadioHATRaspberry Pi PCIe HAT for radio modules - supports LoRa (and other) radio modules from Dorji, GNice-RF, E-Byte and others. Sources available for the HAT and supported radio cards at https://gi...
RadioHAT - Raspberry Pi radio development platform

1532 0 3
Jan Gromeš

Jan Gromeš

CZECH REPUBLIC, THE

1

0
The good old HC-SR04 SONAR module, and its newer, 3.3V HC-SR04P sibling, have long been go-to distance sensors for hobby robot circuits. The downside is that these modules are distinctively large, wit...
QWIIC-VL53L4CD Time-of-Flight Distance Sensor Module

1744 0 2
John Rampelt

John Rampelt

CANADA

11

11
IntroductionWhen I’m prototyping, testing and debugging circuits I often need various components, including switches, LEDs, resistors, and so on. This project, BenchIO, combines commonly needed compon...
BenchIO: Your Prototyping Sidekick

1421 1 4
James Stuart

James Stuart

UNITED KINGDOM

2

0
Greetings everyone, and welcome back. Here's something fun and custom.This is my version of an Xbox controller, which I built from scratch. It features an ESP32-C6 DevKit as the main MCU, paired with ...
DIY XBOX Controller

1915 1 2
Arnov Arnov sharma

Arnov Arnov sharma

INDIA

66

50
Hello everybody, my name is Luciano. I am 21 years old and I designed this 10 millimeter spacer because nobody was selling them or making them. And I needed one for my own fat bike slash e-bike. And b...
10mm brake disc spacer

1875 0 0
luciano wolters

luciano wolters

NETHERLANDS, THE

0

0
The Portable DJ Rig for Mixing on the Move!Get ready to mix anywhere with this innovative DJ rig designed for the Hercules DJ Control Mix. Whether you're walking, standing, or on the go, this bumper c...
The Portable DJ Rig for Mixing on the Move! -for DJ Control Mix-

2464 0 8
3D KIMBA

3D KIMBA

ITALY

3

0
Meet ARPS-2ARPS-2 is version two of my Arduino-compatible Robot Project Shield for Arduino UNO. ARPS-2 is a refinement of the original ARPS circuit and adds two additional Servo or I/O headers while r...
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO

3772 0 6
John Rampelt

John Rampelt

CANADA

11

11
MiSTer Floppy is an add-on board that connects to the MiSTer USER port to provide real physical floppy disk access on the MiSTer Multisystem.Currently only the Minimig core is supported. For more deta...
MiSTer Floppy (SMD Version)

4384 0 12
Rob Smith

Rob Smith

UNITED KINGDOM

24

0
The Waveshare ESP32-C3 Mini development board is a powerful and compact solution for modern IoT and embedded projects. I personally enjoy using it in small, portable designs. However, while working on...
A Compact Charging Breakout Board For Waveshare ESP32-C3

4517 3 8
Kishan Pratap Singh

Kishan Pratap Singh

INDIA

21

3
After scrutinizing pioneering research papers on AI-powered applications and improvements for restaurant food preparation and delivery, I had become fascinated by the prospects of AI-oriented solution...
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System

5315 2 2
Kutluhan Aktar

Kutluhan Aktar

TURKEY

14

82
Transparent Christmas PCB Badge. When ordering from PCBWay, please specify that the PCB core should be transparent, white solder mask, black silkscreen, and gold pads. All the other settings are defau...
Transparent Snowflake Christmas PCB Badge

3268 2 8
Vaclav upir

Vaclav upir

CZECH REPUBLIC, THE

43

0

The PCBWay that recognize the talent and effort of the best ELECTRONIC designers in the World.

© COPYRIGHT 2019

About us
Contact us
Follow us on