|
KiCad 8.0KiCad
|
ChotuBot - must have Fun Robot for all ages!
The ChotuBot robotics kit introduces users to three fundamental applications of robotics. Its modular design and adaptability make it suitable for beginners, hobbyists, and STEM education.
The ChotuBot is only based on comparator with three sensors (one selectable at time using jumper) thus comparing the sensor input with the reference voltage via potentiometer.
This allows the calibration to be done for bot against the sensor.
The robot can work as following at a time:
- Line Follower
- Light Follower
- Obstacle Avoider
- Obstacle Follower
- Light Avoider
Along with calibration the left and right Motor actuation can also be changed via swapping the motor connection to the connectors.
ChotuBot - must have Fun Robot for all ages!
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(1)
- Likes(2)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
More by Ankita Pardeshi
-
Modifying a Hotplate to a Reflow Solder Station
136 0 1 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
105 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
345 4 1 -
How to measure weight with Load Cell and HX711
412 0 3 -
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
523 0 0
