Tools, APP Software Used etc.
|
fusion360 |
Description
mop head M12 to 1/2"
Can never find a quality mop head attachment that doesn't break or strip the threads. Then this 316L Stainless steel adaptor is for you. It will allow the standard M12 threads from the mop to adapt to the 25.2mm or 1/2" pole with an interference fit.
Nov 18,2025
69 views
mop head M12 to 1/2"
M12 to 25.2mm pole or 1/2 inch pole mop head attachment. (interference fit)
69
1
1
Published: Nov 18,2025
PCBWay Donate 10% cost To Author
File Last Updated: 2025/11/18 (GMT+8)
File update record
2025-11-1812:11:04
CAD or technical drawing file is updated.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(1)
- Likes(1)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Engineer
You may also like
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
228 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
233 0 1 -
-
-
