BrewOsmosis
For the BrewOsmosis system PCB, you'll need, in addition to the board, 10k resistors (between 3 and 7 depending on your configuration), three-pin 2EDG3.81 STRAIGHT connectors (between 7 and 9 depending on your configuration), 40 2mm pitch pins, and an additional ADS1115 module for the future.
https://diyhomebrewers.com/2025/09/brewosmosis-domotizacion-de-un-sistema-de-osmosis.html
BrewOsmosis
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen(Without Speaker)
BUY NOW- Comments(3)
- Likes(0)
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by diy homebrewers
-
BorePilot - ESP32-S3 Smart Borewell Pump Controller
86 0 0 -
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
324 0 1 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
381 0 1 -
-
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1483 0 3







