A set of FREE PCB Gerber files to make various breadboard like PCBs for prototyping and permanent placement. I call them the "Naan" boards, named after my favorite bread, naan. There are 7 different types and sizes to choose from based on your needs. They are a lot more inexpensive than commercial PCB breadboards and will be of good quality.

The Gerber files can be downloaded here: https://github.com/jscottb/pcbs

Board information:

1. tiny-naan-single W: 22mm x H: 48mm - Single board gerber of the tiny-naan - 128 linked holes
2. tiny-naan (pre-panelized) W: 22mm x H: 48mm on a sheet that is 89mm x 96mm with 8 on it - 128 linked holes
3. micro-naan W: 36.4mm x H: 38.7mm - Single-sided - 180 linked holes - very cheap to do as a 2x3 board panel
4. lil-naan W: 41.5mm x H: 46.7mm - 180 linked holes + power rails and some extra non-linked
5. Half-naan W: 53.4mm x H: 70.9mm - 288 linked holes + power rails and some extra non-linked
6. Full-naan W: 56mm x H: 96mm - 408 linked holes + power rails and some extra non-linked
7. Xlrg-naan W: 99.3 x H: 96.9 - 816 linked holes + power rails and extra non-linked
8. Old Half-naan W: 58mm x H: 73mm

Naan boards in use: