|
KiCad 9.0 |
Breadboard USB-C PSU 1.2V ~ 5V
The goal was simply to get the power I need on a breadboard from one of my many USB-C power supplies without having to go through multiple parts to get the 1.8V or 2.5V I needed sometimes.
This board is very simple: plug USB-C power, and get the power you chose on each rail (as low as 1.2V, adn up to 5V).
It pairs well with another board I made of logic signal level converters, and often when dealing with weird hardware I needed one of those power levels most power adapters did not provide.
I have built it for myself and sharing for anyone to use it.
Breadboard USB-C PSU 1.2V ~ 5V
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by MagicalTux
-
-
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
282 0 1 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
359 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1435 0 3
