Breadboard Power Supply 5V/3.3V
### DESCRIPTION
This is a very simple breadboard power supply Breakout Board that takes power from a DC wall Socket and outputs a selectable 5V or 3.3V regulated voltage using a switch. This board can be easily inserted into a breadboard using a .1" headers mounted on the bottom of the PCB. Pins labeled VCC and GND plug directly into the power lines.
### TECHNICAL DETAILS / COMPONENTS
DC Barrel Connector (2.1mm center positive)
TO-220 Voltage Regulator (LM317 1.5A max current)
1N4001 Reverse Protection Diode
100uF 25V Capacitor
10uF 25V Capacitor
0.1uF 50V Capacitor
Red Power LED - High Brightness
2 x SPDT Slide Switch
4 x 0.1" Header Pins
2 x 330 Resistor 1/6W
390 Resistor 1/6W
240 Resistor 1/6W
PTC resettable fuse
### LEARN / TOPIC / BUILD INSTRUCTIONS
https://www.studentcompanion.co.za/breadboard-regulated-power-supply-5v-3-3v/
Breadboard Power Supply 5V/3.3V
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(6)
- Likes(10)
- 2 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
-
10design
-
10usability
-
10creativity
-
10content
More by Bitahwa Bindu
-
ESP8266 IoT Dev Board
### DESCRIPTIONA simple and cheap ESP8266 IoT Dev Board, it can be replicated by anyone, componnets ...
-
Student Companion EasyRelay 1 Shield
### DESCRIPTIONArduino shields are boards that can be plugged on top of the Arduino PCB to extend it...
-
Automatic Temperature Control System with PIC Microcontroller
### DESCRIPTIONThis automatic temperature control system has the ability to monitor and control the ...
-
Breadboard Power Supply 5V/3.3V
### DESCRIPTIONThis is a very simple breadboard power supply Breakout Board that takes power from a ...
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
229 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
235 0 1 -
-
-
