|
PlatformIOPlatformIO Labs
|
Automatic watering system with IOT copatibility
The project is a small PCB with as main microcontroller an ESP32. There is also a SIM7020 module for when there is no WiFi available.
The board can controller a valve and a pump. It has support for a battery and a normal power supply.
Further it has a lot of GPIO connections since it is still a prototype.
The end result can change depending on the results of the use period.
Automatic watering system with IOT copatibility
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(4)
More by Engineer
-
-
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
324 0 1 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
382 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1483 0 3
