Audio Isolator
I need this at work to for an audio output that was incompatible with board with 3w Amp and Micro controller.
The Ground level of the input would force the Micro controller to shut down the amp and use Headphones.
Grounding the Reset pin on the Micro controller sort of worked, but lost the functionality.
This simple solution was needed and is used Regularly at work for testing Audio output boards and at home with Micro Controller board as IR volume control
Audio Isolator
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
More by Mark Hodgkinson
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
58 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
891 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
523 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
2988 2 3 -
RadioHAT - Raspberry Pi radio development platform
2534 0 4 -
-
-
