Atari Jaguar Spinner Top PCB with Rotary Encoder
This is just sharing the project from https://github.com/abzman/atari-jaguar-PCBs/tree/main/jaguar%20spinner%20top%20pcb by Evan Allen (abzman), released into the public domain under the Unlicense. All credit for the design goes to the original author.
This board is a variant of the standard controller top PCB, with the same 121.1 × 45.7 mm outline, button contact pads and 13-pin link. It adds a Bourns PEC11R-4020K-S0024 rotary encoder whose two outputs drive the Left and Right lines, so turning the knob acts as a spinner.
It pairs with the standard controller lower PCB from the same repo. ENIG (gold) finish and 4/4 mil minimum spacing are recommended. Note that the original repo’s files for this board are named “jaguar controller top pcb”.
Atari Jaguar Spinner Top PCB with Rotary Encoder
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen(Without Speaker)
BUY NOW- Comments(0)
- Likes(0)
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Engineer
-
Dreamcast Serial Adapter – CP2102N USB-C
This is just sharing the project from https://github.com/cepawiel/dc-serial – all credit goes to the...
-
DreamPicoPort – 4-Port Dreamcast Controller to USB Adapter
This is just sharing the project from https://github.com/OrangeFox86/DreamPicoPort – all credit goes...
-
PicoDreamcast – PicoPSU Power Adapter for Sega Dreamcast
This is just sharing the project from https://github.com/chriz2600/PicoDreamcast – all credit goes t...
-
DC2VGA – Dreamcast SD/VGA RGB Dongle Horizontal_PCB
This is just sharing the project from https://github.com/jeffqchen/DC2VGA – all credit goes to the o...
-
DC2VGA – Dreamcast SD/VGA RGB Dongle Vertical_PCB
This is just sharing the project from https://github.com/jeffqchen/DC2VGA – all credit goes to the o...
-
Dreamcast VGA Adapter – Switchable VGA / RGB / TV
This is just sharing the project from https://github.com/nunosousa/DC_VGA_Adapter, designed by Nuno ...
-
50-Pin BTB Breakout for Sega Dreamcast (GDEMU on VA2)
This is just sharing the project from https://github.com/albalog-cloud/50-pin-breakout-Dreamcast, de...
-
Dreamcast GDEMU FFC Adapter
This is just sharing the project from https://github.com/programmerta/dreamcast_gdemu_ffc, designed ...
-
Shiba GD-IDE – IDE Hard Drive Adapter for Toshiba Dreamcast GD-ROM Drives
This is just sharing the project from https://github.com/pyroesp/Shiba-GD-IDE, designed by pyroesp a...
-
Maple Bus Breakout Board for Sega Dreamcast
This is just sharing the project from https://github.com/Zeigren/Maple-Bus-Breakout, designed by Zei...
-
openGDROM – FPGA + MCU Development Board for the Dreamcast G1 Bus
This is just sharing the project from https://github.com/Zeigren/openGDROM-PCB, designed by Zeigren ...
-
Bus Breakout Board for Sega Dreamcast
This is just sharing the project from https://github.com/Zeigren/G1-Bus-Breakout, designed by Zeigre...
-
FC ROM Vomitter – Wi-Fi Upload NROM Cartridge for Famicom (ESP32-S3)
This is just a share of the FC ROM Vomitter (nescart-fc Rev A-FC) project by Keitark. All credit goe...
-
FamiCom UNROM512 PRGRAM
This is just a share of the FC-UNROM512-PRGRAM project by ponchick. All credit goes to the original ...
-
FamiCom DiscreteCart
his is just a share of the FC-DiscreteCart project by ponchick. All credit goes to the original auth...
-
Holy Diver – Famicom Cartridge PCB with Off-the-Shelf SMD Parts
This is just a share of the Holy-Diver project by J. Brink (Brink-J). All credit goes to the origina...
-
fc-magicon (rev0.2)
This is just a share of the FC-MAGICON project by SHIMA-R7. All credit goes to the original author, ...
-
FAMICOM cart breakout board
This is just a share of the FAMICOM_PROVE_CART project by antarcticlion. All credit goes to the orig...
-
-
-
-
BorePilot - ESP32-S3 Smart Borewell Pump Controller
341 0 0 -
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
489 0 1 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
475 0 1 -







