|
ATTINY85-20MUMicrochip Technology
|
x 1 | |
|
CL31B106KQHNFNESamsung Electro-Mechanics
|
x 1 |
|
DiptraceDiptrace
|
ATTINY85 Neopixel Driver
I needed to fit a driver for some Neopixels into a tight space. This board when populated is smaller than the DIP version of the chip used. At just 10mmX10mm if fits just about anywhere. Two pads for 5v in, 3 pads for 5v and data to the Neopixels and 4 pads for programming the chip.
ATTINY85 Neopixel Driver
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
More by Ralph Price
-
ATTINY85 Neopixel Driver
I needed to fit a driver for some Neopixels into a tight space. This board when populated is smalle...
-
Arduino Nano ATTiny Programmer Shield
Add a couple sockets and headers, plug in an Arduino Nano and a 8 pin or 16 pin ATTiny 84/85 and pro...
-
ATTiny85 Breakout
I wanted to make some Neopixel light bars for the grand kids but didn't want to mess with proto boar...
-
Tiny85 breakout
While working on a Neopixels project for the grand kids I came up with this design to hold an ATTiny...
-
Programmable Mist Maker - XIAO / QT PY Extension
1014 2 1 -
RadioHAT - Raspberry Pi radio development platform
817 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3277 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3897 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4277 2 2
