Raspberry Pi Pico Contest - Share Project to Get a New One for Free
VOTE NOW!
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Design 1/4
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Usability 2/4
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Creativity 3/4
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Content 4/4



AMIGA TEST KIT SERIAL PORT DONGLE




AMIGA TEST KIT SERIAL PORT DONGLE is a diagnostic tool for testing Amiga computers serial ports.



Hello,


Amiga Test Kit, by Keir Fraser (keirf), is a very popular diagnostic tool for Commodore Amiga computers. It can test many functions of your Amiga and find if there is a fault.


But you need some extra connections (dongles) for testing Serial and Parallel Ports of your Amiga.


I have prepared some simple dongles to test the sarial and parallel ports of your Amiga. In fact, you can make these dongles using only connectors, cables, a few resistors and LEDs. However, it will be easier and safer to make and use them with these PCBs.



This circuit board has been tested on an Amiga 500 computer and is working as it should.



You can download the Amiga Test Kit ADF disk image from this link.

https://github.com/keirf/Amiga-Stuff


Many thanks to Keir Fraser (keirf)




You can find Parallel Port Dongle from this link:

https://www.pcbway.com/project/shareproject/AMIGA_TEST_KIT_PARALLEL_PORT_DONGLE.html




In order to protect your electronical devices, always turn off your Amiga before connecting or unconnecting the dongles or any other device.


Gerber files can be changed at any time. Before paying for the PCBs, be sure to update your orders!



Have fun

Thank you.



Components:


DB25F 25 pin D-sub female connector

2pcs. 1K Ohm 1/4 watt resistance

2pcs. 5mm LED




Mar 31,2021
472 viewsReport item
  • Comments(1)
  • Likes(6)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
    View More