Bottom Soldermask
Top Soldermask
Bottom Copper
Top Silkscreen
NC Drill
Top Copper
Bottom
Top
3D Printer Inductive sensor - Board Interface
### DESCRIPTION
This board provides safe link interface between your inductive/capacitive sensors and your 3D printer main board. Sensors need higher voltages like 12v which printer board cannot handle. I used PC817 optcocoupler in order to provide safest interface.
### TECHNICAL DETAILS / COMPONENTS
Components can be seen on silkscreen.
### LEARN / TOPIC / BUILD INSTRUCTIONS
Upper Side is input 12v dc.
Bottom Side is output 5v dc.
3D Printer Inductive sensor - Board Interface
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(2)
More by Engineer
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
150 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1000 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
574 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3044 2 3 -
RadioHAT - Raspberry Pi radio development platform
2590 0 4 -
-
-
