18650 PowerWall with Onboard BMS
Details: https://openhardwarecoza.wordpress.com/2020/03/05/diy-18650-powerwall-with-onboard-bms/
This is based off the 18650 Powerwall project
- Includes onboard BMS circuitry to protect and balance charge the cells.
- Modules are stackable with 25mm brass M3 Hex spacers, to build packs up to 100aH
- Balance connectors provided if you want to you can skip adding the Balance charger circuitry and instead use your own like Batrium, Orion, etc
- Onboard cell protection
- Undervolt disconnect (2.9v per cell)
- Overvolt disconnect
- Overcurrent Disconnect
18650 PowerWall with Onboard BMS
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(9)
- Likes(22)
- 2 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
9usability
-
9creativity
-
9content
-
10design
-
10usability
-
10creativity
-
10content
More by Peter van der Walt
-
Programmable Mist Maker - XIAO / QT PY Extension
1084 2 1 -
RadioHAT - Raspberry Pi radio development platform
902 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3340 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3954 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4341 2 2
