Printed an M8 thread from OpenSCAD and BOSL2 library and was already useable. M5 and M4 might work if chased with a tap. Suspect that M6 is probably the smallest sensible choice for a direct print thr...
Curiously costs about the same as commercially available CNC part. The deep slots print beautifully.
Fantastic job PCBWAY!
Prototype multi stage brew processing timer. Double sided to fit Hammond 1455P1601 enclosure. Board is very high quality!
It turned out exactly as I imagined.
It turned out exactly as I imagined.
Everything went well. The boards look good. No complaints.
Perfect
This is a good example of a bad design; the outer flange had some very random distortions that varied from print to print. While very flexible, the material eventually breaks with a crack starting at ...
Fantastic job PCBWAY!
Fantastic service, very knowledgeable and helpful to a novice builder.
It turned out exactly as I imagined.
It turned out exactly as I imagined.
It turned out exactly as I imagined.
Perfect
Produced within a satisfactory timeframe and featuring a high-quality PCB. Arrived in intact packaging, well-protected to prevent damage during transit.