Recommended
Shared Projects Questions Sponsorships Feedback Blog Like
There were no problems
I needed a platform for my SAA1099 for code development, to be able to continue the work of creating a GameBlaster (Creative Music System (CMS)) card for the RC2014. I have the YM2151 platform, this a...
This is a Stephan Slabihoud design, and part of my test-suit for Z80 and CP/M computers. Once again a work by PCBWAY, finish was great, great turnaround time, quick shipping. Thank you!
This pcb was missed in the previous shipment, it had been left behind. The company quickly admitted the mistake and shipped them out. They arrived quickly, the finish is great, and no problems at all.
It came out great, the finish is great, all the PCB worked worked just fine. No problems. I like the fact the white is not matte like most other manufacturers the contrast with the silkscreen is perfe...
My own fault, sent the gerbers without the holes to secure the 7-segment displays. The card works, finish is great, and I could superglue the standoffs upside-down to the board to secure the displays....
Color is great! Had no problem at all, too bad it takes a little longer to produce blue, as the green was done within 24 hrs, but I had to wait 3 more days for the blue to be ready before it was deliv...
Really nice, I had not problem putting the parts on these. Very nice finish, and the silk screen came out great.
My own design for a board to place on an Arduino Uno for a YM2149 sound chip. There is no amplification, it allows you use either the Arduino or a dedicated oscillator for the SSG. Fast production and...
This is part of my RC2014 collection, I had some YM2151 ICs over so decided to put them in a card. This is not my own design but an Ed Brindley design. The finish was great, it worked like a charm.
Quick and fast delivery, nice packaging, nice finish. Always really nice when the edges of the board don't feel like it will cut you.
Not my own design, but gerbers provided by Stephan Slabihoud at the 8bit-museum. The fabrication was great, the only draw back was due to me and not the manufactures. I had bundled this with three des...
Had no problems at all with this order.
Not a hard design, but with 770 pads with some rows, and some columns connected. The pads seems to be of good quality, none released when I de-soldered. Only thing, and this is not on PCBWAY but due t...