Description

Module characteristics:

1. Built-in synchronous switch step-down converter chip

2. Input voltage range: 4.5V to 32V (the input voltage must be higher than the output voltage because it is a voltage drop module)

3. Output voltage range: 3V to 12V, automatically adjusted according to the fast charge protocol

4. Output power: 24W (4V@3.6A, 5V@3.4A, 9V@ 2.5A, 12V@2A, etc.)

5. Output voltage cable compensation

6. The output has CV / CC characteristics (output current is less than the set value, output CV mode; output current is greater than the set value, output CC mode)

7. The conversion efficiency reaches 97%

8. Soft start function

9, 220Khz switching frequency

Output fast charge:

1. Support BC1.2, Apple, Samsung agreement

2. Support Qualcomm QC2.0 and QC3.0

3. Support MTK PE1.1/PE2.0

4. Support Huawei fast charge protocol FCP (note that many Huawei mobile phone systems do not support fast charge)

5. Support Samsung Quick Charge Agreement AFC

6. Support Spreadtrum fast charge protocol SFCP

Multiple protection, high reliability

1. Output over-current, input over-voltage, input under-voltage, output short circuit protection

2. Over-temperature protection of the whole machine

Features: each of the four channels supports QC 3.0 fast charge protocol, can support fast charge at the same time, can output 5V 9V 12V (requires mobile phone protocol support) voltage, output current is adaptive, single channel power consumption 24W, 4-channel module power consumption 96W, PCB adopts FR-4 1.6mm board thickness design, optimized layout and wiring, tight design, open window on the back for heat dissipation, low full load working temperature, standby current 0.013A, and the module has an output voltage compensation function.

Note: This module is a 4-way pressure drop fast charging module, please use 12V-30V DC power supply, and the positive and negative poles cannot be reversed.

Comments(0)

Upload photo

You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP

0 / 10000

4 way fast charge module 12V/24V to QC3.0

Product ID: LP272 (Coupon is not available)
Out of stock

3309

720 Beans

(It may incur customs clearance fees.)

Quantity:

Exchange Method:

Bean

Add to cart

The commission ratio for sharing this product is 3.00%, login account and get your exclusive link! 1. Exclusive shared link
Each product has its own promotion link, you can share the link with your friends.
2. Successful transaction
Your friend places an order through the link, and the transaction is complete.
3. Get commission
You will receive a commission correspondingly proportional to the order amount.

Fasteners

Linear Motion

Description

You might like

4 way fast charge module 12V/24V to QC3.0

The PCBWay that recognize the talent and effort of the best ELECTRONIC designers in the World.