Neopixel LED controller
The #PixyMaster aka neopixel LED controller is a tiny little driver board to control WS2812b leds.
Since it has also wifi enabled so we can use it over the internet as well.
The board is tiny enough to fit inside any small enclosure. The size of the PCB is 25x50mm with some great features to offer.
Talking about the sensors, it can be equipped with a LDR for controlling the brightness, a DHT11 for ambient temperature and humidity.
Also there's an i2c port for additional i2c sensors like a DS3231 RTC or MPU6050 accelerometer and gyro sensor depending on the application.
Apart from that it also has a push button and a Barrel jack connector for external DC supply. .
?
Neopixel LED controller
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(2)
- Likes(6)
- 4 USER VOTES
- YOUR VOTE 0.00 0.00
-
7design
-
8usability
-
9creativity
-
10content
-
8design
-
7usability
-
8creativity
-
8content
-
10design
-
10usability
-
9creativity
-
9content
-
10design
-
10usability
-
10creativity
-
10content
More by SAYANTAN ElectroPoint4u
-
3D printed Stepper Bot
This is a E.S.P32 based robot that I made which can not only be controlled over the internet but als...
-
ESP32-C3 NodeMCU
This is a DropIn replacement for NodeMCU ESP8266 AMICA CP2102 WiFi Development Board. The pinout are...
-
NeoPixel XL
What is it?If you ever been used or seen neopixel LED, then you will be familiar to this concept. It...
-
ESP32 BLE Macro Keyboard
This is a wireless macro keyboard consist of 10 cherry MX key swathes with individual backlight. It ...
-
DIY Novatrope
A DIY replica of the popular Novatrope project, an elegant kinetic kinetic sculpture using Attiny85,...
-
Fanmade 7th Anniversary badge
This is a simple PCB badge that I designed for celebrate 7th anniversary of PCBway. It has 6 RGB bli...
-
Reflow Hotplate Controller
Story :Last time I made a reflow soldering hotplate from a regular clothing iron. And it works prett...
-
ESP Programmer
ESP8266 and ESP32 required some special arrangement to pull the chip into boot mode. Typically this ...
-
Portable Power Supply for microcontroller projects
If you are working on a portable electronics project, or in a remote place where you can’t bring you...
-
Pico Clock
StoryRaspberry Pi foundation recently launched their first microcontroller based development board R...
-
Addressable Output using WS2811
So I was needed to control almost 200+ relays using one microcontroller and during research I found ...
-
Portable wireless touch Remote
An ESP32 module comes with a lot of different features. One of such features is it’s touch capabilit...
-
How to make RGBW lights using Aluminium PCB
When it comes to making electronics projects, a custom PCB board is always one of the top priorities...
-
ESP32 BLE GamePad
This is a DIY handheld gamepad, made using ESP32 microcontroller. You might have seen such game cont...
-
12 Channel Ultimate Home Automation
ESP32 based 12 Channel IOT Home Automation using Blynk Application. Can be controlled using Physical...
-
World's Slimmest NeoPixel LED Matrix
I always have this idea of what would have happened if we can put the components inside the pcb? Let...
-
ESP-12E/F Breakout Board
Size:25.4mm x 30mmSignal Layers:2None Signal Layers:10Components:12Pads:57 Surface Pads:35 Plated Th...
-
PCB Pyramid
In this project I built a rather interesting project which I thought a long time ago. Its basically ...
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
229 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
235 0 1 -
-
-
