Rat Rig Bed Status Light and Fan Splitter

Boards look great and surface finish is good. I had some small text on these and it all came out legible and clear. The only "issue" (and this may have been my fault) was the serial number was not printed in the location I thought I specified, but that did not detract at all from my overall satisfaction.



Oct 27,2026
12 viewsReport item
PCB
HDI PCB
Assembly
FPC/
Rigid-Flex
X
Choose Num (pcs)
2 Layers
1.6mm
CNC
Machining
Sheet Metal
3D Printing
Injection
Molding
Aluminum
Aluminum
Resin
ABS
Dan Begallie View Profile
2posts 0followers 0following
  • Comments(0)
  • Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    Nice and fast. Thanks for the job. This is just for 50 words
    Boards look great and surface finish is good. I had some small text on these and it all came out legible and clear. The only "issue" (and this may have been my fault) was the serial number was not pr...
    100% satisfied with the components and assembly. Nothing was misplaced and all boards worked exactly as expected once tested.
    Absolutely fantastic in every way. Clear communication, professional handling, perfect delivery.
    Board was EXACTLY as ordered, even earlier than predicted, and I WOULD be happy with it if not for some stupidity in the design on my part, PCBWay: You did an excellent job; I did not. I have included...
    everithing ok
    Excellent manufacturing quality and turn-around time. Very good communication with engineers as well! ENIG finish looked very nice and even without any irregularities.
    Perfect fitment on my motorcycle wheels! The center bores, P.C.D. bolt holes, and 0.05mm flatness/runout tolerances were spot-on. The AL6061-T6 machining quality and Black Hard Anodized finish are exc...
    SHOW ME MORE