Dual channel DDS board

Can be used to generate signal in radio devices.


Nov 03,2015
5,084 viewsReport item
PCB
HDI PCB
Assembly
FPC/
Rigid-Flex
X
Choose Num (pcs)
2 Layers
1.6mm
CNC
Machining
Sheet Metal
3D Printing
Injection
Molding
Aluminum
Aluminum
Resin
ABS
roberts.trops View Profile
0posts 0followers 0following
  • Comments(0)
  • Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    I recently ordered a CNC-machined Aluminum 6061 part from PCBWay and am extremely pleased with both the quality of the part and the overall experience. The machining was precise, the surface finish wa...
    The PCB fabrication was really good, had the best finish and the working of the PCB is also as expected. Expecting to continue the further PCB fab with the same quality. :) happy customer
    Good board, and PCBWAYs own panelization was really easy to break off. The Fiducial marks and product number were placed on the breakaway part, that made the actual parts come out super clean the sil...
    So grear that this service exists! Would have become so so many otherwise. I soldered it in a hotplate and it all worked. Its fantastic!
    Final version of my control PCB for turnout motor, indicator leds, and pushbuttons. You need one of these boards per turnout. Production process was fast and smooth. Shipping was also flawless. Thanks...
    A complete redesign and performance upgrade of my original ESP32-based 2-wheel robot — now featuring 4-wheel differential drive, dual motor drivers, enhanced sensing, and a custom-designed 2-layer PCB...
    Worked flawlessly
    Very happy with PCBWay support. Our project rests ok.
    SHOW ME MORE