Tachometer mounting bracket for a motorcycle made from 2,5mm CF. Part is lasercut exactly to drawing and only has a small scratch on one side, which doesn't bother me as it is not visible when install...
Beyond impressed by the level of quality and for how PCB Way accommodated last minute requests. This is my first part fabricated by them. It will not be my last. Thank you PCB Way for making high prec...
As usual this PCB is very professionnal looking. Production was very very fast and quality is there. You can order the PCB on this page. Everything is open source open/hardware : ESP32_RC_Motor_test...
Been wanting a TFC III+ for a while now and also wanted to have a go at making one. I ordered these boards (10 of them) for just that project. They arrived well packaged, and all in perfect condition...
I ordered analog video signal switches. The order was made without prior detailed testing of the two-layer board, and even then, an excellent result was obtained. I placed an order for 900 boards with...
This is one of a few parts for a weighing system to get to know the amount of coffee in the cup during a brew prozess on an espresso machine. All of this is carried out in the name and form of the Ga...
On the second attempt I got the gerber file output and silkscreen correct - the result is everything I could have hoped for and I can't wait to re-build. CNY delayed things a bit but still pretty quic...
Absolutely outstanding service, 4 days ahead of schedule on delivery. Boards are such amazing quality and price. Thank you again.
Part is exactly to drawing and absolutely drenched in WD40 to prevent corrosion, which is good. The part also has grinding marks, which is okay as the part will later be painted anyway.
Excelent!!
After the Back and forth with the sales rep, I finally was able to send the correct file, the projected date of delivery was kept and the product was delivered as intended/required, it fits my Z16XEP ...
As always, excellent quality and delivery on time. Thank you
This is a cover/shroud thats desined to clip over a crimped connector. Its located over a coffee machine boiler which is reaching temperatures of up to 150 degrees Celsius. The wall thickness of a...
This is a clip thats acting as a viewport and as a holder for a 6mm 230V lamp, to be used in place of the originals on an espresso machine. All of this is carried out in the name and form of the Gagg...
This PCB holds a Z573M Nixie Tube and plugs into the Nixie Clock PCB with a male dual row header. Once again, I am amazed at the speed and great precision this, and other PCBs that I have ordered, ...
My first order with PCBWay. Not my design (Scott at A Hornets Nest YouTube channel did the hard work) but very impressed with the quality of product and the end to end service. Top marks! Hope my next...
1 ... 43 44 45 46 47 48 49 50 51 52 53 ...