PCB replaces EPROM for 16 channel use to full support ham-radio 145 MHz or 435 MHz. Programmed in oldschool assembly. With: - raster 6,25 12,5 25 kHz - ctcss tones to open repeater - 144 MHz to 146...
rebuild 16 channel Kyodo tranceiver to ham-radio 145 MHz or 435 MHz
I wanted 5 PCB's but 10 was the exact same price so I ordered 10. I received 11 of them for some reason, but I do not complain. They are packaged nicely and high quality products. I opted for the matt...
In this project, I made a replacement delay sector gear for the American 'Simplex' secondary clock, as replacement sectors no longer appear to be produced. To reduce potential future wear, I chose to ...
Excatly like I ordered, thanks for the quick delivery!
This is The housing for an lcd for a classic fiat 600 EV.. it fits in the astray
Working on a multi sensor board controlled by esp. Still prototyping and revising the design, type of sensors and connectivity. PCBway's possibility to order a small amount of boards for a special pro...
I wanted a stronger and very flat machine bed for my prover max 3030 cnc machine. I decided to have it made out of steel. Fit and finish is outstanding. And all the tolerances were hit.
rebuild front PCB from 16 channel use to full support ham-radio 145 MHz or 435 MHz. Programmed in oldschool assembly. With: - raster 6,25 12,5 25 kHz - ctcss tones to open repeater - 144 MHz to 146...
Exactly as ordered and working perfectly. USBSID-Pico is a RPi Pico (RP2040/W RP2350) based board for interfacing one or two MOS SID chips and/or hardware SID emulators over (WEB)USB with your compute...
Everything went great, good communcication and great quality of the products. would recommend.
This is exactly what I ordered! Transaction was quick and production was fast as always. Delivery was superb!
Speed indicator for a Classic fiat 600 E|V
Absolutely superb support by Taylor in getting the BOM ready for production. Final product is excellent, recommend++++
I didn't expect this high level of detail. I saw some pictures of other parts and they all looked quite grainy on the surface. So i had my doubts if our design with 0,5mm features would pass the test ...
Perfect pcb and the assembly was perfectly done. Cartridge works like it is supposed to!
1 2 3 4 5 6 7 8 9 10 11 ...