All features are within 0.4mm of spec. Arrived slightly wrapped. Due to a design error, the well in the center is too shallow for the 100mm Petri dish to sit in.
A big thank you to PCBWay and its staff for producing excellent quality and flawless PCBs. https://www.pcbway.com/project/shareproject/COMMODORE_VIC_20_SD2IEC_35KB_27_8_RAM_EXPANSION_CARTRIDGE_ed3c...
The Osprey is a wireless ergonomic keyboard with built-in LiIon battery management, a USB-C port for charging, and a Nordic nRF52840 microcontroller with PCB antenna. All components were soldered o...
A stencil to make my life a bit easier, Well manufactured and accurate, Thank you
The board was built to generate two voltages (mV) isolated from each other and from the ground by emulating that produced by a thermocouple already compnsata by a cold junction of zero degrees. Some p...
I am very satisfied with the PCB Boards I received. They were exceptionally well made to my ordered specifications and design. Now that I have the boards I see some minor issues in my board design ...
Every part of the order was done cleanly and professionally, was incredibly happy with the result. Customer service was especially prompt, courteous, and helpful.
Project included built-in antenna, RFID IC, WIFI, LED's, ADC, and power management circuit. Everything was very well done and completed quickly. It would have arrived right on time, but a hurrican...
Small brackets expertly laser cut and folded from 0.8mm stainless steel. No warping on the thin edges from laser cut. All 6 are accurate and consistent in dimension. Very impressed.
A small part to test the viability of SLM printing working parts in aluminum with post machining similar to casting. Print was exceptional quality and within tolerance. Part was solid without any poro...
The Osprey is a wireless ergonomic keyboard with built-in LiIon battery management, a USB-C port for charging, and a Nordic nRF52840 microcontroller with PCB antenna. The main PCB has a flawless, v...
Perfect as always. 10 boards ordered - 13 boards received. Assembled and tested already
Hi, We received these parts today and found that they are out of tolerance and some of them have pink on them. The length shown in the image is supposed to be 51.053 +-0.15mm(ISO 2768-1). I measured 1...
Excellent machining quality and accuracy within specification. Attention to fine detail and edge chamfering very impressive. Logo etching very good. Surface finish - light machining perfect.
The PCB was build exactly as design, perfection. Project works as intended
After (some) efforts trying to etch a custom PCB (see results), I've done a big step forward with custom PCB supplier PCBWay Let some pictures talk for me... a great experience with also a super int...