Perfect for my purpose.
I am very satisfied with quality, haven't expected it to be this good. All of the critical dimensions are held to tolerance, surface finish and anodized finish is perfect, can't spot any problems with...
Once again, PCBWay knocks it out of the park! Not a whole lot to say except that my board soldered up wonderfully, and looks great in the classic green color! Definitely going to be ordering more boar...
My board was quickly and professionally fabricated. No complaints at all!
Excelente trabajo, muchas gracias!
I had this made for my Schecter Sun Valley, but should replace any cover 140x87mm around 2.15mm thick. It turned out way better than I could've imagined, fantastic! :)
The camera badge is a wearable art piece which has very detailed silk and copper work that PCBWay did an awesome job on. This is why PCBWay is my preferred manufacturer for all my #badgelife projects...
Perfect
PCB Badge representing the 10 years of the pcbway, counter from 0 to 10 and then maintaining the number 10 until they turn it off representing the 10 years
The Walkeremoteboard working good
Project is a very modern rocket launch control panel. PCBway produced several boards for this controller which implement "lockout" logic to insure that multiple rockets are not fired at one time. I su...
The boards were produced rapidly and arrived to me in no time. Tolerances are all great. No burrs or defects on the board. I used rather small traces and drills as well as curved traces, but this was ...
Excelente trabajo, muchas gracias!
The PCB serves as a connection host between a raspberry pi and two illuminated physical switches. Apart from making the connection, the board hosts current limiting resistors for the LEDs as well as l...
Great quality
PCBWay service for 3D printing was on par with the very satisfactory results for their PCB service. Parts were delivered on time, with the expected level of geometric accuracy (despite some challengin...