Recommended
Shared Projects Questions Sponsorships Feedback Blog Like
This chip uses the temperature sensor TMP512. This chip has an onboard temperature sensor and allows to connect of a thermocouple to it. I soldered this chip and tested it as I aim to use to track the...
I designed this PCB to test multiplexing some Photodiode chips. The PCB arrived on time and well packaged. Despite being manufactured in another continent, the PCB was made fast and arrived in less th...
This project consisted of testing the viability of multiplexing analog multiplexers when recording the signals from photodiodes. I used 96 photodiodes and 12 multiplexers and it worked great. Note tha...
The purpose of this chip was to test multiplexing different photodiodes while tracking the temperature. The photodiodes detect the light in the room, so I wanted to test their stability when multiplex...
I use this stencil to place the soldering paste onto the 96 photodiodes and 12 resistors onto one of the sides of a previous design. I use this regularly and it has definitely made my life easier when...