Recommended
Shared Projects Questions Sponsorships Feedback Blog Like
Another pcbway shared project: A Raspberry PI hat that turns your RPi into a "real" MT-32 or General MIDI device! Easy to build as all parts a THT. https://github.com/gmcn42/clumsyMIDI
The famous cardridge done by PixelPast, Each module/PROM can contain 8KB or 16KB ROM files, which loads *way* faster than from disk. Gerber files, schematic and instruction available: http://www.gran...
This is a shared pcbway project: https://www.pcbway.com/project/shareproject/Battery_Capacity_Measurement_Using_Arduino_Nano_[Lithium_NiMH_NiCd].html Unfinished for myself but did a quick test and de...
OpenVideoModulator is an Open Hardware adapter that converts an RGB video signal to Composite and S-Video. Instead of buying or building an expensive OSSC (Open Source Scan Converter), I bet on this ...
Here you can see the 1st of five very unpopulated PCBs of OpenFlops I'm trying to build. I'm using this as a training project, learning and imporving my soldering skills in SMD as this PCB is using a ...
Inspired by https://github.com/tebl/Composite-Video-Amplifier
OpenC64Cart16K is an Open Hardware Cartridge for the Commodore 64. It only supports 16 KB ROMs and uses a single (E)EPROM chip. I'm using EEPROMs fot these pbs. Each module can contain four 16KB ROM ...
My own project. I've build an Atari 1088XEL by myself (yikes!) and wanted to insert the fabulous Covox Sound Module - but it didn't fit to the 1088XEL pcb as there is another socket in it's way. I nee...
I found this project in a corresponding forum. This pcb is way easier to build as a appropriate cable :) Using this adapter will improve the qualitiy of giving picture - appropriate device required.
Quote of http://kair.us/projects/jakadapter/index.html : "The Jakadapter allows connecting two Atari-style controllers to USB. It supports standard joysticks, paddles and also Sega Megadrive gamepads...
These are small MIDI interfaces for the Atari 1088 XEL project to be used onboard the XEL. It needs a Dream Blaster S2 Board which generates the MIDI sound by wavetables. The interface itself communic...
Was a funny project. Everything worked excellence. Great PCBs and easy to solder. Inspired by: https://cbm-pi1541.firebaseapp.com/ https://www.hackup.net/tag/pi1541/