Recommended
Shared Projects Questions Sponsorships Feedback Blog Like
Thank you very much, very good quality! The i2c GPIO expander SX1503 has 2 x 8 bit IO interfaces. These ports are addressed via I2C. The advantage of this module, that each port can be supplied in...
a 100mm x 160mm circuit board is supplied, which you can assemble yourself. All components are designed as through-hole mounting. An RS232 or USB interface is available. The following variants tha...
everything OK. Fast and quality.
PCB for building an active antenna for 77.5KHz. ( 74mm x 60mm x 1,6mm ) Other reception frequencies possible with a corresponding ferrite antenna. It is recommended to use a 50 Ohm coax cable to con...
Fast delivery and very good quality. Everything is perfect, thank you ! Adapter circuit board for the microcontroller UB8820 or UB8840 to DIL40 socket. An EPROM socket for the 2716 (UB8820) or 273...
Thank you for the good quality of the circuit board. DCF77 receiver for receiving the time signal at 77.5KHz. PCB 160 mm x 54 mm x 1.6 mm. It is possible to install the receiver in a tinplate h...
perfect quality, thank you very much.
Thank you for the good quality. Euro board, epoxy, tin-plated, with option for USB-2.0, RS232 and Power supply More information: https://www.shotech.de/en/euro-board-epoxy-tin-plated-with-option...
Thank you for the good quality of the circuit board.
Perfboard for your own extensions to the Z8 Basic single-board computer. The circuit board is plated through on both sides. Signals are specially led out and labeled for top and bottom.