Recommended
Shared Projects Questions Sponsorships Feedback Blog Like
Power factor correction controller board for a larger system. This was an emergency replacement PCB after the ones we were using developed carbonization between layers resulting in low impedance betwe...
A variable DC input to constant 12V DC output to relevant standards with EMI filtering and protection stages. PCB was free of defects with good plating and consistent finish. Silk screen text is sli...
A PCB given to new employees to evaluate SMD and THT soldering competency. Simple board with nothing complicated about it. PCB's delivered on time with good quality and no faults.
A large PCB to ensure positioning of LEDs and membrane button pads are held within corresponding metal work for interfacing around a display. PCB had no issues regarding quality. Packaging for delive...
A modular LED driver for use on different Bezel LED panels Board finish was good, castrated vias easy to solder to the carrier board
Breakout board for MSP430 microcontroller for use with internal development and testing Board finish was all good, castrated vias easily soldered to base board or bread board header pins
Testing the viability of a Pogo-pin connector for removable peripherals with high-speed data interfaces. PCBs made to permit sturdy electrical connections and mechanical hard points for environmenta...
A variable DC input to constant 12V DC output to relevant standards with EMI filtering and protection stages. Finished product was good, larger parts (capacitors) we slightly light on solder, but al...
A battery powered two-way Ethernet switch (NO/NC). PCB's came in clean and was easy to put all the parts down. Text readability was a tad hard but this can be accounted for with thinner font thicknes...
A modular LED driver for use on different Bezel LED panels Board finish was good, castrated vias easy to solder to the carrier board
A modular LED driver for use on different Bezel LED panels Communication with photos of any issues during the sourcing and assembly process was professionally done and maintained until satisfactory r...
Breakout board for MSP430 microcontroller for use with internal development and testing Communication around issues sourcing parts and assembly concerns done so professionally and in a timely fashion...
Testing the viability of a Pogo-pin connector for removable peripherals with high-speed data interfaces. PCBs made to permit sturdy electrical connections and mechanical hard points for environmenta...
A quick and dirty PCB to expand the capabilities of a cable tester to suit 2.54mm and 3mm pitch plugs. Nothing complicated, quick and easy to submit, arrived on time and good enough quality.