Recommended
Shared Projects Questions Sponsorships Feedback Blog Like
My 3-Output power supply does not have the standard 0.75" spacing for the binding posts, so this board slides over the binding posts and provides an offset hole for a banana jack that is properly spac...
This board was used to test an incremental step in the evolution of the overall design. Several changes were made, including artwork and silkscreen. The boards came out looking perfect and I had no tr...
I have been refining this board design for a few years and this is the first version where I moved the design from a 2-layer to a 4-layer stackup. The boards came out looking great! Soldermask and sil...
Gave PCBWay a try for the first time. Ordered 10 boards and got 11! Excellent quality! They were 100% routed and had very clean edges. I have examined them under a microscope and can confirm that the ...
I needed a small board to test a reset supervisor circuit before incorporating it into a larger design. This little board allowed me to jumper the circuit to an existing board for testing. It worked p...
Gave the metal solder stencil a shot. Glad I did! It made assembling my boards a breeze! The hole alignments are perfect and are cut sharp and clean, even with the fine pitch parts. The solder laid do...