Recommended
Shared Projects Questions Sponsorships Feedback Blog Like
Manufactured PCBs delivered outstanding quality. Mid project design change accommodated almost instantly. Printed documentation layer clearly visible, easy to read. Exposed pads prepared for easy sold...
Outstanding. Four ounce copper on a board this size is not a trivial etch - holding trace and gap geometry through that much copper is where cheaper fabricators fall down - and PCBWay held it cleanly ...
Exceeded my expectations. This was the first prototype of the encoder board and all five came back clean - accurate trace definition, good drill alignment, sharp legible silkscreen and consistent sold...
First prototype print for a new enclosure design, and it did its job well. Accurate to the file, clean surfaces, good layer consistency, and dimensionally close enough to validate the design against r...
Print quality was excellent across all ten, with consistent dimensions and a clean finish on every unit. The parts did not fit my application because I measured the internal depth too shallow - entire...
Turnkey assembly was excellent. PCBWay sourced the components and built to the BOM and pick-and-place data without a single query back to me, and the result needed no rework. Placement accuracy and so...
Same consistent result across the full set of ten. Accurate, clean and ready to use on arrival, with no post-processing needed on any unit. At this price for a ten-off batch the value is hard to beat.
Assembly matched the fabrication. All ten boards built correctly to my BOM and placement data, with accurate component orientation and clean joints throughout, and not one needed rework. Sourcing, fab...
Assembly exceeded expectations too. PCBWay sourced the components and built to my BOM and placement data with no queries back to me, and all five boards needed no rework at all. Component orientation ...
Same good result. Printed accurately, mated correctly with the companion part, and needed no cleaning up. PCBWay’s PETG prototyping has been consistently quick and consistently right, which is what ma...
Same consistent quality across the full set of ten. Accurate to the file, clean surfaces, no defects on any unit. Superseded by a revised design because of a measurement error on my side, but the part...
Small part, done properly. Dimensions and hole alignment were spot on, so it seated correctly first time with no filing or adjustment. Easy to overlook a part like this, but getting it right is what m...
Exceeded my expectations, and PCB quality from PCBWay is always outstanding. Trace definition, drill alignment and solder mask registration were all clean, the silkscreen is sharp and legible, and the...
Excellent build quality across all ten. This is the main enclosure for a 10-unit audio zone controller batch, and consistency between units is what matters at this quantity - every one came out to the...
1 2 3