Recommended
Shared Projects Questions Sponsorships Feedback Blog Like
I printed some samples of key caps in different materials and slight variations as an experiment. This material came out with great accuracy and the smoothest feeling surface out of my four samples. I...
I printed some samples of key caps in different materials and slight variations as an experiment. This material came out with good accuracy. Feeling slightly on the rough side, but not unpleasant for ...
The PCB (used only one so far) worked without problems. The irregular outline is cut precisely and fits perfectly into the assembly with two layers of PCBs, 5 layers of laser-cut plates and 3D printed...
I printed some samples of key caps in different materials and slight variations as an experiment. This material came out with good accuracy. The switch stems were slightly on the thick side, but still...
These 3D printed resin key caps work well. The small Choc stems turned out very solid with no concerns of breaking off during installation or removal. Dimensions are accurate. The small hexagonal hole...
The PCB (used only one so far) worked without problems. The irregular outline is cut precisely and fits perfectly into the assembly with two layers of PCBs, 5 layers of laser-cut plates and 3D printed...