Product Description

X302 bluetooth 5.0 power amplifier module (US-standard adapter)

If you need Euro-standard adapter, please click here.

Product parameter:

  • Adapted power supply: DC12V/3AAUX+ Bluetooth
  • Audio input: AUX+ Bluetooth800mV
  • Input sensitivity: 800mV
  • Adapted horn: 4-8Ω; 5-50W
  • power output: MAX 30W*2@4Ω
  • frequency response: 20Hz-20KHz
  • Bare metal size: 107*80*39 mm (height excluding electron tube)
  • Packing size: 240*155*70 mm
  • Package weight: 463g

Note: The electronic tube of this product can be replaced, and supports a variety of small 7-pin electronic tubes such as 6J1, 6M1, 6J2, 6M2, EF95, 6AK5, GE5725W, GE5654W, etc.

Handling instruction

1. Turn the switch/volume knob counterclockwise to ensure the switch is closed.

2. Install the randomly worn electronic tube into the electronic tube holder according to the direction (the electronic tube is not divided into left and right sides. Check whether the pin is deformed before installation. If there is any deformation, you can gently correct it by hand. When installing, slowly insert the electronic tube vertically into the electronic tube holder, taking care not to shake as much as possible).

3. The output interface of power amplifier is connected with passive speaker (R is connected with right channel and L is connected with left channel) or the output interface of AUX audio is connected with active speaker.

4. Connect the power adapter.

5. Turn the switch/volume knob on, and the indicator light flashes.

6. This product has two audio input modes: AUX wired and Bluetooth wireless, and AUX wired input mode is preferred. Choose the audio input method you want.

7. Turn the switch/volume knob to adjust the volume to an appropriate size.

8. Enjoy the charm of daring machine quietly.

  • Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
    View More

    You might like

    • Pico Dual-channel Network Transparent Transmission Expansion Board
      $12.99 or 1560 Beans
      BUY NOW
    • Yahboom programmable Tumble:bit based on Micro:bit
      $59.99 or 7200 Beans
      BUY NOW
    • ESP-12H-Kit development board
      $5.99 or 720 Beans
      BUY NOW
    • 2.4G Wireless SPI Mini Module
      $1.49 or 180 Beans
      BUY NOW
    • HiLetgo SX1276 ESP32 LoRaWAN
      $19.99 or 2400 Beans
      BUY NOW
    • E18-MS1-PCB
      $6.00 or 720 Beans
      BUY NOW
    • Heltec Arduino ASR6501 Lora Development Board
      $15.99 or 1899 Beans
      BUY NOW
    • 0.96" Inch Oled LoRa ESP32 SX1276 Module(868/915MHz Antenna)
      $22.00 or 2640 Beans
      BUY NOW
    • X302 bluetooth 5.0 power amplifier module (Euro-standard adapter)
      $35.00 or 4200 Beans
      BUY NOW
    • X302 bluetooth 5.0 power amplifier module (US-standard adapter)
      $35.00 or 4200 Beans
      BUY NOW
    • NF-01-S 2.4G Wireless Remote Control SPI Module
      $1.00 or 100 Beans
      BUY NOW
    • E220-900M22S LLCC68 LoRa Module
      $4.00 or 480 Beans
      BUY NOW
    • Particle Boron LTE CAT-M1
      $60.00 or 7200 Beans
      BUY NOW
    • BeagleBone Black - Rev C
      $66.00 or 6600 Beans
      BUY NOW
    • SimpleLink Wi-Fi CC3200 LaunchPad
      $0.00 or 5600 Beans
      BUY NOW
    • ESP32-S2-Saola
      $10.00 or 1200 Beans
      BUY NOW
    • Octavo Systems OSD32MP1-BRK Prototyping Platform
      $0.00 or 4100 Beans
      BUY NOW
    • STM32MP157C-DK2
      $0.00 or 10100 Beans
      BUY NOW
    • Giant Board
      $70.00 or 7000 Beans
      BUY NOW
    • ESP32 Cam WIFI Bluetooth Module
      $12.00 or 1440 Beans
      BUY NOW
    Product Name
    Link for reference
    Quantity