Product Description
Sensor Expansion Board With PH2.0 Port for World of Module(Micro:bit)
Description
These expansion board expand all the pins on the Micro:bit board/Raspberry Pi Pico/Arduino UNO board. Every two adjacent pins are combined with GND and VCC to form a 4 Pin PH2.0 interface, which can be connected to various sensors through the PH2.0 cable. We also designed servo pins on the expansion board, which can be used to connect all the servos. This expansion board is perfectly compatible with Yahboom world of module series and 3 in 1 series sensor modules.
Features
- Micro:bit is easily plugged into this expansion board.
- Compatible with Yahboom world of module series and 3 in 1 series sensor modules.
- PH2.0 interface is adopted to effectively prevent the user from reverse connection.
- Can be used to create some interesting Micro:bit building block sensor kits.
- Brick holes are reserved, which can be combined with bricks to build any shape.
- Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
-
-
Sensor Expansion Board With PH2.0 Port for World of Module(Micro:bit)$8.99 or 1080 BeansRedeem Now
-
-
-
-
Micro:bit expansion board motor steering gear development drive board$19.99 or 2240 BeansRedeem Now
-
Jetbot Mini AI Vision Robot Car ROS Starter Kit(with NVIDIA Jetson Nano 4GB)$299.99 or 36000 BeansRedeem Now
-
-
-
-
-
16 in 1 Building:bit Super kit(Including the Microbit V2 mainboard)$89.99 or 10800 BeansRedeem Now
-
-
-