Product Description
RS485 Wind Direction Transmitter
Note: If you need to change the address and baud rate, USB to 485 module is required. The default is address 1, baud rate 4800.
Product parameter:
- DC power supply (default): 10-30V DC
- Operating temperature of transmitter circuit: -40~60℃, 0%RH~95%RH, no condensation
- Communication interface: 485 communication (modbus) protocol
- Baud rate: 2400, 4800 (default), 9600
- Data bit length: 8 bits
- Stop bit length: 1 bit
- Default Mod Bus communication address: 1
- Support function code: 03
- Parameter setting: Use the provided configuration software to configure through the 485 interface
- measuring range: Eight indicating directions
- Dynamic response speed: <0.5s
Line color description
- Brown wire: positive power supply (DC10-30V)
- Green line: 485-A
- Black line: negative power supply
- Blue line: 485-B
Register address
- Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
-
PCBWay MPU-6050 Module 6DOF Three-Axis Accelerometer Gyroscope Module GY-521$1.99 or 240 BeansRedeem Now
-
-
-
-
-
-
-
-
Sound sensor module (voice control switch, audio detection/analog + digital)$6.00 or 720 BeansRedeem Now
-
-
-
-
-
-
-
-
Capacitive Soil Moisture Sensor Not Easy To Corrode Wide Voltage Module$4.00 or 400 BeansRedeem Now