Capacitive Soil Moisture Sensor Not Easy To Corrode Wide Voltage Module
This capacitive soil moisture sensor is distinguished from most resistive sensors on the market and uses capacitive sensing to detect soil moisture. The problem that the resistance sensor is easily corroded is avoided, and its working life is greatly extended.
The sensor has a built-in voltage regulator chip that supports a 3.3-volt working environment, which means it works even on a 3.3V Arduino control board. A miniature PC such as the Raspberry Pi only needs an external ADC (analog to digital signal) conversion module to work.
With an external screen and a motherboard, you can talk to your plants! See if it is thirsty and you don't need more water to moisten.
Operating voltage: 3.3 VDC
Output voltage: 0 ~ 3.0 VDC
Interface: PH2.54-3P
Size: 98 x 23mm (LxW)
- Comments(0)
You might like
-
-
PCBWay MPU-6050 Module 6DOF Three-Axis Accelerometer Gyroscope Module GY-521$1.99 or 240 BeansRedeem Now -
-
-
-
-
-
-
-
Sound sensor module (voice control switch, audio detection/analog + digital)$6.00 or 720 BeansRedeem Now -
-
-
-
-
-
-
Microphone Module I2S Interface Inmp441 Mems High Precision Low Power Ultra Small Volume$5.00 or 500 BeansRedeem Now -
Capacitive Soil Moisture Sensor Not Easy To Corrode Wide Voltage Module
Out of stock
