Product Description

MQ135 air quality sensor module

Description:

The gas sensitive material used in the MQ-135 gas sensor is tin dioxide (SnO2), which has a low conductivity in clean air. When there is polluting gas in the environment where the sensor is located, the conductivity of the sensor varies with the concentration of the polluted gas in the air. Increase and increase. Using a simple circuit, the change in conductivity can be converted into an output signal corresponding to the gas concentration.

The MQ-135 gas sensor has high sensitivity to ammonia, sulfide, and benzene vapors. It is also ideal for detecting smoke and other harmful gases. This sensor can detect a variety of harmful gases and is a low-cost sensor suitable for a variety of applications.


Features:

1. Good sensitivity to harmful gases in a wide concentration range

2. High sensitivity to ammonia, sulfide and benzene atmospheres

3. Long life, low cost

4. Simple driving circuit

Working voltage: 5 VDC

Power consumption (current): 150 mA

Output form: analog and digital output


Attention:

When the MQ sensor module is connected to VCC and GND, the power indicator of the module will light up. Before using, the power supply should be warmed up for at least 2 minutes. It is normal for the sensor to heat up slightly because there is a heating wire inside.

Wire it correctly! Do not reverse the positive and negative connections, which will burn out the electronic components of the board. The sensitivity of the sensor probe is non-linear, so the analog output voltage has a non-linear relationship with the concentration of sensitive gas. In the actual test, the distance from the sensitive source gas will be different in concentration. The 5.1ohm resistor is connected in the heating circuit of the sensor to protect the heating wire from the impact of cold power-on.

  • Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    • PCBWay Ultra-Compact Digital Amplifier Board
      $0.99 or 120 Beans
      Redeem Now
    • PCBWay MPU-6050 Module 6DOF Three-Axis Accelerometer Gyroscope Module GY-521
      $1.99 or 240 Beans
      Redeem Now
    • -7%
      Barcode QR Scanning Identification Module
      $35.99 or 4320 Beans
      Redeem Now
    • NFC Expansion Board PN532/RFID
      $19.99 or 2400 Beans
      Redeem Now
    • Digital Thermometer(black)
      $2.00 or 240 Beans
      Redeem Now
    • M5Stack ESP32 Wi-Fi Camera
      $24.00 or 2880 Beans
      Redeem Now
    • Touch Key Switch Induction Module
      $2.00 or 240 Beans
      Redeem Now
    • Two-axis Key Rocker Sensor
      $2.00 or 240 Beans
      Redeem Now
    • -12%
      VL53L0X laser ranging module
      $6.99 or 840 Beans
      Redeem Now
    • Color recognition sensor(Two-hole version)
      $2.00 or 240 Beans
      Redeem Now
    • Blood oxygen external pulse detection heartbeat sensor module
      $3.99 or 480 Beans
      Redeem Now
    • Sound sensor module (voice control switch, audio detection/analog + digital)
      $6.00 or 720 Beans
      Redeem Now
    • MQ135 air quality sensor module
      $1.00 or 100 Beans
      Redeem Now
    • Raindrop sensor module
      $1.00 or 120 Beans
      Redeem Now
    • LPC845 sensor analog module
      $9.99 or 1200 Beans
      Redeem Now
    • KY-006 Passive Piezoelectric Buzzer Alarm Sensor Module
      $1.00 or 100 Beans
      Redeem Now
    • Reed sensor module magnetron switch
      $1.00 or 100 Beans
      Redeem Now
    • 4 Pin Flame Sensor Fire Detection Module Infrared Receiver
      $2.00 or 200 Beans
      Redeem Now
    • Microphone Module I2S Interface Inmp441 Mems High Precision Low Power Ultra Small Volume
      $5.00 or 500 Beans
      Redeem Now
    • Raindrops Detection Sensor Module
      $1.00 or 100 Beans
      Redeem Now
    Product Name
    Link for reference
    Quantity