LM5122 Adjustable Step-up And Regulated Power Supply Module (12V-48V)
Description:
The LM5122 is a high-performance and high-efficiency synchronous step-up controller chip with a wide input voltage range (up to 65V) and a high-current output capability of up to 10A, making it suitable for most high-current DC output applications. Actual measurements show that this module can output a voltage of 48V and a continuous output current of up to 5A (with good heat dissipation), but adequate heat dissipation is necessary to prevent the power chip from triggering thermal shutdown. With its high output voltage, large on-load current, and high conversion efficiency, this module is ideal for a range of engineering applications. Additionally, its compact size and miniaturized design make it a desirable choice for many applications. This module features a brand-new LM5122, a 12A saturated power integrated inductor, high power and voltage withstand, low internal resistance, fast M0-S tube, and large capacity input and output filter capacitor.
Product Parameter:
- Module type: LM5122
- Input voltage: 8V-40V
- Output voltage: 12V-48V adjustable
- Output current: continuous output is better than 3A and peak value is 5A
- Output power: typical value: 24V@4A on-load test
- Module size: 53.5 x 30 x 12.2 mm
Application: LM5122 module is applied to high-power boost power supply
Precautions for using the module:
- This module adopts a DC-DC boost voltage DC voltage stabilizing module designed by LM5122 high-performance synchronous boost controller. this module has high output current and high output voltage, so please pay attention to heat dissipation of the module when in use, and pay attention to safety when outputting high voltage.
- This module only supports the maximum voltage output of 48V for the time being.
- Comments(0)
You might like
-
-15%PCBWay Single-Channel Relay Module with Delayed Power-off, Triggered Delay, and Cyclical Timing Circuit Switch$1.69 or 200 BeansRedeem Now
-
-
Four Way Holder V3 Development Board(Compatible with Raspberry Pi/STM32)$8.99 or 1080 BeansRedeem Now
-
-50%1 Channel Relay Module 5V with optocoupler Support High and Low Level Trigger$0.99 or 120 BeansRedeem Now
-
Relay Module Interface Boards for Arduino Low Level Trigger 5V 2 Channels$2.00 or 200 BeansRedeem Now
-
-
-
LM2596S DC-DC 3A Buck Adjustable Step-down Power Supply Converter Module$0.99 or 120 BeansRedeem Now
-
-
-
-
-
USB isolator/USB to USB isolator digital signal audio power isolator ADuM3160$9.99 or 1200 BeansRedeem Now
-
-
-
Dual 18650 Battery Holder V3 Development Board(Compatible with Raspberry Pi/STM32)$4.99 or 600 BeansRedeem Now
-
18650 Battery Holder V3 Development Board(Compatible with Raspberry Pi/STM32)$3.99 or 480 BeansRedeem Now