ICM-20602 sensor module six-axis acceleration gyroscope module
Product parameters:
Product name: Six-axis gyroscope ICM-20602
Power supply: 3. 3-5V (with LD0 voltage regulator chip)
Communication method: support IIC and SPI (10M bit rate) communication protocol
Gyroscope range: ±250 500 1000 2000° /s
Acceleration range: ±2±4±8±16g
Pin spacing: 2. 54mm
Chip: Chip built-in 16bit AD converter, data output is 16
Product advantages:
ICM-20602 belongs to a new generation of sensors. The measurement accuracy is better than that of MPU, and the noise is lower than that of MPU. ICM-20602 can reach 10M baud rate using hardware SPI.
Module pin function description:
VCC —— power supply 3. 3V-5V
GND —— power ground
SCL/SPC —— IIC clock pin
SDA/SD1 —— IIC data pin/slave input pin
SAO/SDO —— IIC address/SPI slave output
CS —— SPI Chip Select
INT——Interrupt
FSY——Synchronization
- Comments(0)
You might like
-
-
PCBWay MPU-6050 Module 6DOF Three-Axis Accelerometer Gyroscope Module GY-521$1.99 or 240 BeansRedeem Now
-
-
-
-
-
-
-
-
-
Sound sensor module (voice control switch, audio detection/analog + digital)$6.00 or 720 BeansRedeem Now
-
-
-
-
-
-
-
Microphone Module I2S Interface Inmp441 Mems High Precision Low Power Ultra Small Volume$5.00 or 500 BeansRedeem Now