ubiquiti poe power injector holder

This allows for a poe injector to be mounted to a rack.

Oct 16,2026
12 viewsReport item
PCB
HDI PCB
Assembly
FPC/
Rigid-Flex
X
Choose Num (pcs)
2 Layers
1.6mm
CNC
Machining
Sheet Metal
3D Printing
Injection
Molding
Aluminum
Aluminum
Resin
ABS
Engineer View Profile
2posts 0followers 0following
  • Comments(0)
  • Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    Machining was top notch, Anodising was even and deep. All tolerances met.
    This project is a custom 15 × 15 RGB LED panel designed as the display core of a pixel-art mood lamp. Its 170 × 170 mm PCB contains 225 individually addressable Worldsemi WS2812B-2427-V6 LEDs at 10 mm...
    This is the 3d printed part of my water based tide clock. It was a very tricky 3d model, with a lot of very fine details. At the limit of the SLS printer ! I dared to have it printed and the result ...
    Perifect, the parts was spot on toleraces and finish. Can´t dream of anyone doing it better
    This project is a custom 15 × 15 RGB LED panel designed as the display core of a pixel-art mood lamp. Its 170 × 170 mm PCB contains 225 individually addressable Worldsemi WS2812B-2427-V6 LEDs at 10 mm...
    Meet LogiCOOL 2.0—a DIY smart refrigerant assistant that uses temperature and pressure readings to help assess refrigerant charge and take the guesswork out of troubleshooting. A rewarding journey fro...
    Perifect, the parts was spot on toleraces and finish. Can´t dream of anyone doing it better
    The product is exactly what I wanted, airtight and completely smooth however it was delivered to the wrong house, I don’t think that was your fault or your company’s fault which is why I have still ra...
    SHOW ME MORE