two wire (DMX) interface module

This module uses two wires to connect a 4 digit 7 segment display with 4 buttons and 3 status leds. With this module you end up having a lot more free pins on your arduino which you can use for other purposes. Besides more free pins this module also remembers the output state and can dim the display, this reduces CPU load so you have more time to run the main program. The PCB was my first PCB and it ended up really great, The next time I would make some minor changes to improve the project.

Dec 09,2018
587 viewsReport item
PCB
HDI PCB
Assembly
FPC/
Rigid-Flex
X
Choose Num (pcs)
2 Layers
1.6mm
CNC
Machining
Sheet Metal
3D Printing
Injection
Molding
Aluminum
Aluminum
Resin
ABS
Joram de Poel View Profile
5posts 6followers 0following
  • Comments(0)
  • Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    More by Joram de Poel

    You might like

    perfect
    Excelente trabajo, muchas gracias!
    I had this made for my Schecter Sun Valley, but should replace any cover 140x87mm around 2.15mm thick. It turned out way better than I could've imagined, fantastic! :)
    The camera badge is a wearable art piece which has very detailed silk and copper work that PCBWay did an awesome job on. This is why PCBWay is my preferred manufacturer for all my #badgelife projects...
    The boards were produced rapidly and arrived to me in no time. Tolerances are all great. No burrs or defects on the board. I used rather small traces and drills as well as curved traces, but this was ...
    Excelente trabajo, muchas gracias!
    The PCB serves as a connection host between a raspberry pi and two illuminated physical switches. Apart from making the connection, the board hosts current limiting resistors for the LEDs as well as l...
    Great quality
    SHOW ME MORE